Jixi Chenfeng Medical Apparatus & Instruments Manufacturing Co., Ltd.

Major Parameters:

>Capacity of the sterilization room: 75L

>Operation temperature: 125℃ (135℃ According to the requirements of matching)

>Range of time setting: 1-999 (min)

>Main input: AC220V±10%   50Hz

>Rated capacity: 6KW

>Maximum operating pressure: 0.22Mpa 

>Maximum operating temperature: 135℃

>Net weight of the product: 140kg

>Overall dimension: 652*542*1271 (mm)

Main features:

1. Vertical, inner circle and outer square, electric heating dual stainless structure. Microcomputer control technology and touch key. 

2. Fully automatically controlled by program including raising temperature, sterilization, air venting and drying. The program can also preset the temperature and time of the whole procedures. 

3. Dynamic LCD display of status, temperature and time. 

4. Detection and indicator of sensor disconnection. 

5. Quick air venting, slow air venting and not-air venting can all be preset, to satisfy different sterilization demands. 

6. Using inner air and water cycling mode does not discharge steam to keep environment clean and dry. 

7. Horizontal sliding door uses imported medical silica gel seal ring. When sterilization is finished through :one button operation", the system will automatically prompt you with beep sound, easy and safe. 

8. The device is installed with wheels at the bottom to be moved easily. The sterilization room equipped with 2 stainless baskets of Φ370*275mm is easy for taking and putting articles. 

9. Automatic detection. Automatically alarm. 

10. Heating pipe is easy to replace. 

Safety Device: 

1. Automatic over temperature protection. The system automatically cut off heating power supply and alarm with light and sound when temperature is higher than the set temperature. 

2. Dry burning resistant protection. The system automatically cut off heating power supply and alarm with light and sound when the water level is below the low water level. 

3. The safety interlocking device installed on the door will automatically lock and cannot be opened to keep people safe when the sterilization room is pressured. Door control switch is also equipped. Power supply will not be switched on unless the door is closed in place. 

4. Dual overpressure protection. The high precision pressure sensor monitors inside pressure all the time and air releasing safety valve can ensure the safety of personnel, devices and articles. 

5. Electric main circuit with short-circuit protection. Direct current control circuit with overvoltage and overloading protection.